The charge controller, also known as charge regulator, is a necessary instrument to protect batteries from overcharging and sometimes excessive discharge. It is connected between the solar panel and the battery.
When the battery can not and should not accept more electrical charge, the charge controller cuts the flow of the power to the battery so that the battery does not become overloaded.
Also, if the electrical devices are connected to the battery source and the battery must not reach too low voltage levels, the charge controller interrupts the flow to the devices and protects the battery from being damaged.
Charge Regulator Lumiax 5A 12V Used for the protection of 12V batteries in cars, caravans, boats etc. It protects the battery from overcharging and deep discharging and it keeps them in a good condition. It has LED indications for the state of charge. If the output power of the overall system is higher, then…
Charge Controller Shine10 Lumiax, 10A, 12/24V (HM58010) The Charge Controller 10A Lumiax protects your battery of overcharging and over-discharging. It is easy to use and to connect. It is widely used in autonomous low-capacity solar installations. Ideally used in solar systems of up to 8A, 12/24V. Its LED indicators show the status of both the…
Ρυθμιστής Φόρτισης Lumiax 10A – 12V με έξοδο USB Κατάλληλος για μικρά αυτόνομα φωτοβολταϊκά συστήματα 12V. Προστατεύει το αυτόνομο φωτοβολταϊκό σύστημα από υπερβολική φόρτιση, εκφόρτιση, από βραχυκύκλωμα και εξασφαλίζει την μακροχρόνια καλή λειτουργία του. Ο ρυθμιστής φόρτισης 10Α με έξοδο USB είναι μια οικονομική και πολύ βάσιμη λύση για φωτοβολταϊκές εγκαταστάσεις μικρού ή μεσαίου μεγέθους. …
Charge Controller Epsolar 10A 12/24V PWM for 2 batteries simultaneously Technical Specifications: Two battery charging eliminates the extra cost of two separate solar charging system Intelligent System Optimum Control 12/24V auto work Battery type selection High efficient Series PWM charging Local external temperature compensation Use MOSFET as electronic switch, without any mechanical switch Remote meter…
Charge Regulator 10A – 12/24V Steca PR 1010 (HM50011) The Charge Regulator 10Α – 12/24V PR 1010 is one of the top charge regulators. Having been further improved, it provides perfect battery maintenance and power control of up to 900Wp. Its wide screen indicates clearly, using symbols and numbers, the values for voltage, power and…
Charge Controller Steca PRS 1010 Regulators PRS of the company STECA are very simple and easy to use. Their modern design helps the user to have a clear picture of its off grid system. Meanwhile, regulators constantly check the battery status and protect both the battery and the other devices connected. The specific charge…
Remote Meter for Duobattery Solar Controller (HM54016) Very practical for monitoring your system from a distance of ten (10) meters, with the special cable that is included. It indicates the solar panel and battery voltage, as well as the charging and consumption current. It also indicates the Amper-hours, Vat-hours and the percentage of the battery…
Ρυθμιστής Φόρτισης 20Α LUMIAX MAX20-EU με 2 εξόδους USB, PWM 12V/24V Προστατεύει το αυτόνομο φωτοβολταϊκό σύστημα τάσεως 12V ή 24V και εξασφαλίζει την μακροχρόνια καλή λειτουργία του. Ο Ρυθμιστής φόρτισης 20Α με 2 εξόδους USB είναι κατάλληλος για αυτόνομα φωτοβολταϊκα συστήματα 12V/24V και για φόρτιση κινητών ή αλλων μικροσυσκευών. Μια οικονομική και πολύ βάσιμη λύση για φωτοβολταϊκές εγκαταστάσεις μικρού ή μεσαίου μεγέθους….
Charge Regulator 20A – 12/24V Steca PRS 2020 The Steca PRS 2020 is one of the most popular charge controllers in the market. It is suitable for use in solar home systems with load currents of up to 20A at 12V/24V. It protects the battery from overcharging and over-discharging, wrong connection with the PV module, wrong…
Charge Regulator 20A – 12/24V Steca PR 2020 The Steca PR 10-30 series of charge controllers is the highlight in the range. The latest charging technologies, combined with a Steca-AtonlC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to…
Charge Controller Epsolar 20A 12/24V PWM for 2 batteries simultaneously Technical Specifications: Two battery charging eliminates the extra cost of two separate solar charging system Intelligent System Optimum Control 12/24V auto work Battery type selection Charging frequency optional High efficient Series PWM charging Remote meter MT – 1 optional Load and battery status indicators Electronic…
Charge Regulator 20A – 12/24V Sunware FOX-320 The FOX-320 charge regulator is suitable for up to 20A and for AGM, gel and lead-acid type batteries. It protects against overcharging and over-discharging batteries and reversal of current. It functions even when there is a large difference in voltage between the PV module and the battery. It is suitable for charging two…
-1.jpg)
FOX – MD1 Remote Display The FOX – MD1 is a remote display for various FOX units. The remote display is easily connected to the FOX unit using the assembled cable. Due to the large backlit display data can be easily read even in dark environments. Depending on the unit connected, the FOX – MD1…
FOX – D1 Battery Display Sunware The fox D1 is a universal digital indicator that monitors battery voltage and charge/discharge current. By the push button on the front side you can set the display mode to show the actual voltage or current. The universal digital display FOX-D1 can be combined with all solar charge regulators,…
Charge Regulator 30A – 12/24V Steca PRS 3030 The charge controller Steca PRS 3030 is one of the most commonly used medium power regulators for autonomous photovoltaic systems. It has LED signs for battery status. Particularly suitable for photovoltaic installations up to 30A at 12V / 24V. Features a fully protected circuit board and is very simple to use. The…
